As an Amazon Associate I earn from qualifying purchases.
1. ALZO digital #ad
ALZO digital Wall Mount with Ball Head for Camera, 6lbs Capacity #adALZO digital #ad
- Alzo digital wall mount with 4 Screws - Ball Head - Alzo Digital 1 Year Warranty. Compatibility: Camera. Load capacity: 6 lbs 2. 72kg.
|Brand||ALZO digital #ad|
|Manufacturer||Alzo Digital #ad|
2. Thinvik #ad
Thinvik Photography Studio Camera Stand,Lighting Wall Ceiling Mount Boom Arm.Extended 14''-22' with 1/4& 3/8 Thread.for Video Monolight,Reflector,Overhead Vertical Horizontal Mounting- Aluminum Alloy #adThinvik #ad
- Space-saving&practicalhang your camera to ceiling or wall, which saves a lot of floor space and makes your studio look in perfect order. Multi-functioncan hang photography, chandelier, camera, flash light and other applicable products.
The photography stand can be used vertically or horizontally. Aluminium alloy skeleton the aluminium alloy skeleton shows that this bracket is more solid, lightweight, secure and stronger in anti-corrosion than traditional iron bracket.
Fully equippedcomes with 3/8, 1/4 adapter screw to fit for mounting most mainstream video light. No need to purchase additional installation equipment. Adjustable length between 13. 7-21. 6 inch35-55cm. The base comes with 4 pieces holes helping mount the boom arm on the wall and ceiling. Easy installationfit the screws into the holes, install your device firmly.
|Part Number||Wall Mount Stand|
|Model||Wall Mount Stand|
3. jusmo #ad
Table C-Clamp Multi Mount Stand for DSLR, Light, jusmo Camera Desk Mount with Auxiliary Holding Arm, Phone, Webcam and More LS02, Overhead Camera Mount with 360° Ballhead and Phone Grip #adjusmo #ad
- Comes with phone grip, 2. 2-3. 9 inch can work with most smartphones. Desk mount stand and auxiliary holding arm all have standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter. Note: it is recommended to adjust the your required height of the Desk mount stand before installing the Auxiliary holding arm.
Note: dslr cameras, Phone, Lights Not included. Secure more gear to your desk mount stand. A single steel pole that clamps horizontally onto Desk mount stand, solid arm provides an auxiliary mounting point for a camera, light or smartphone and more.
The arm optimal load-bearing 1KG2. 2lbs and Max 1. 5kg3. 3lbs, so heavier equipment can be mounted on the pole top, and lighter equipment on the arm for stability.
Desk mount stand 17. 3-41. 3 inch adjustable, gives you ample height for overhead shooting and lighting. The arm can be installed at the lower two sections of the main pole to ensure stabilityHeight up to 28. 7 inch, can not be clamped to the top section. And 14 inch auxiliary holding arm for cameras, lights, phone and More.
4. ALZO digital #ad
Small Camera Wall Mount with Mini-Ball Head and Anchors #adALZO digital #ad
- The load capacity is 4 pounds. With mini ball head with 1/4 x 20 screw thread for camera mounting and angle adjustment. Includes 2 - zinc dry Wall Anchors with screws and installation instructions. Lightweight yet sturdy wall mount for cameras and camcorders.
5. jusmo #ad
For Tripod,Monopod,Slider,DSLR Camera U-100, Professional Metal 360° Rotating Panoramic Ball Head with Cold Shoe, ULANZI Ball Head with Claw Super Quick Release Design, Up 44.1lbs Load #adjusmo #ad
- Available for claw system--quick release top cap mount could connect CLAW series products, swtich easily and quickly. 20kg bearing load--metal CNC processing supports up to 20KG weights.
Slide lock, safe and secure--Slide lock to avoid damage of mistouch. 1/4 to 3/8 screw adapter and a 3/8 " bottom screw thread--You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.
Patenet claw quick release design and creative cold shoe design--ULANZI patent design offers camera Super Quick Release Mount instead of screwing, also offers vlog microphone mount solution.
6. ARKON #ad
Arkon Camera Wall Mount for CCTV POV Camcorders Cameras #adARKON #ad
- Multi angle mount arm features three adjustment knobs and two additional adjustment points provide 180 degree rotation. For mounting a camera to a wall or other surface. Mount uses 4 hole AMPS pattern to attach to wall.
|Manufacturer||Arkon Resources Inc. #ad|
|Warranty||2 year manufacturer|
7. SMALLRIG #ad
BUT2665, Tripod Head Camera 360° Panoramic with 1/4" Screw 3/8" Thread Mount and Arca-Type QR Plate Metal Ball Joint for Monopod, SmallRig Mini Ball Head, Gopro, DSLR, Phone, Max Load 4.4lbs/2kg #adSMALLRIG #ad
- 360 degree swivel tripod head ensure 360° panoramic rotation for panoramic shooting, -90°/+45° front tilt and -50°/+50° lateral tilt for multi-angle adjustment including horizontal shooting and vertical shooting. High stability: low-profile ball head design creates a stronger locking force and higher stability.
Aluminum alloy material: made of aluminum alloy, the Max load is 4. 4lbs/2 kg, Very strong and durable. Universal compatibilitysmallrig mini ball head features 1/4 " thread qr plate screw, tripods, sliders, 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread which is suitable for most DSLR cameras, camcorders, monopods.
Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability.
With rubber-padded mount on the top to protect your camera from potential scratches. Precision panning basethe base of smallrig ball head is finely laser-engraved in 5° increments from ±0°-330° for tracking progressive panning, ideal for multi-shot panoramic photography.
8. Meking #ad
Overhead with 3/8" 1/4" Thread, Umbrellas, Reflectors, Selens Photography Studio Wall Mount, Camera Wall Ceiling Mount Boom Arm Up to 22" for Photo Video Monolights #adMeking #ad
- It comes with 3/8 1/4 adapter screw to apply to different flash, softbox, security camera, DSLR and more device. The wall mounting boom arm is made of high-quality metal material, sturdy and corrosion-resistant.
This light stand adapter is idea for wall ceiling mount to equipments like lights, umbrellas, and reflectors, perfectly save your floor space.
It can be fixed on a solid wall, extending up to 22", and its height is adjustable, and you can adjust its height to meet your needs. Note: comes with 4 expansion screws, which is well built and sturdy to ensure the stability, but is not suitable for thin cement ceiling and plaster walls. Making it strong for heavy duty work.
9. ALZO digital #ad
ALZO Upright Camera Ceiling Screw Mount Kit #adALZO digital #ad
- Includes an alZO Screw Mounting Plate. Securely supports all DSLR cameras and small camcorders. All aluminum bracket and mount construction.
Includes alzo mini-ball camera mount for easy camera angle adjustment; slotted holes in top and bottom of bracket allow for balance adjustment. This product carries an extended 5-year warranty.
|Brand||ALZO digital #ad|
|Manufacturer||ALZO Digital #ad|
10. ULANZI #ad
ULANZI Super Clamp Camera Clamp Mount Monitor 360° Ballhead Magic Arm Double Ball Head Adapter with 1/4"-20 & 3/8"-16 Thread for Canon Nikon DSLR Camera/Gopro/LED Lights/Ronin-M/Ronin MX/Freefly MOVI #adULANZI #ad
- Package: super clamp*1, gopro Adapter*1. Multifunction: the maximum open distance of the super clamp is 2. 3inch60mm, which can help you fix the accessories on 059inch15mm rods, plate, for dji freely Movi 25mm and 30mm rods, bike handles, shoulder rig, and so on.
Standard 1/4” and 3/8” female thread: 1/4” and 3/8” female thread on the back-side of clamp help you to mount a small camera, LED video light, speedlite, microphone, and more.
Come with a gopro adapter, monitor, it is also compatible for gopro. Bottom clamp maximum open distance is 60mm; Best loads is 3. 3 lb1. 5kg. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.
Note: if gopro adapter missing, please contact us. This 360º camera clamp mount is designed for photography studio video shooting. Great quality: made of sturdy aluminum alloy and precise CNC process anodized aluminum materials, solid and sturdy, also with a protective dense rubber pad on clamp area to prevent scratches.