MG Chemicals 8329TFF Thermally Conductive Adhesive – Fast Cure Epoxy, 25 mL Dual Dispenser

#ad
MG Chemicals 8329TFF-25ML #ad - Twist and remove the cap from the cartridge or syringe. Optional attach a static mixer to the 8329tff-50ml. 1: 1 mix ratio. 4. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems. Heat cure to achieve optimal conductivity. Dispense a small amount to ensure even flow of both parts.

B. It is also flame retardant, and meets the UL 94V-0 standard. To stop the flow, pull back on the plunger. Working life: 4 minutes, set time: 15 minutes. 7. A. Without a static mixer, dispense material on a mixing surface or container, and thoroughly mix parts a and b together. Cure time: 3 hours at room temperature or 15 minutes at 65 °c 149 °f.

MG Chemicals 8329TFF Thermally Conductive Adhesive - Fast Cure Epoxy, 25 mL Dual Dispenser #ad - Clean nozzle to prevent contamination and material buildup. Do not discard cap. 1. 6. Heat cure: put in oven at 65 °C 149 °F for 15 min. For quantities less than 1 ml or for stricter stoichiometry control, mix by weight with a high-precision balance.

#ad



Arctic Alumina Thermal Adhesive 5g

#ad
Arctic Silver AATA-5G #ad - A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams. Arctic alumina ceramic thermal adhesive Epoxy w/ Application Wand - 5g NEWArctic Alumina EpoxyTwo syringe tubes2. 5 grams of Part A and 2. 5 grams of part badhesive allows you to bond two materials togetherLayered composite of aluminum oxide and boron nitride.

Pure electrical insulator, neither electrically conductive nor capacitive. Plastic reusable Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti.

#ad



Arctic Silver Arctic Alumina 5g Premium Ceramic Thermal Cooling Adhesive Set AATA-5G

#ad
Arctic Silver AATA-5G #ad - 40 to 150 celsius temperature range. 5g set 2. 5g x 2. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti. Layered composite of aluminum oxide and boron nitride. A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams.

The arctic silver alumina premium Ceramic Thermal Adhesive is a layered composite of aluminum oxide and boron nitride and is a pure electrical insulator. Pure electrical insulator, neither electrically conductive nor capacitive.

#ad



GENNEL 10gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound For LED GPU Chipset Heatsink

#ad
GENNEL GENNEL G109 #ad - Features: thermal properties, strong adhesion * Melting capacity: 0 200 ℃ / 24Hours * Evaporation: 0001% 200 ℃ / 24hours * thermal conductivity:> 1. 2w/m-k * thermal Impedance: 5. 1 * dissipation coefficient. Application: apply to all heatsinkf no fixed clip thermal paste. Idea for mosfet heatsink,vGA CARD Northbridge Southbridge Heatsink.

100% new Heatsink plaster.

#ad



MG Chemicals 9200 Structural Epoxy Adhesive, 25mL Dual Dispenser

#ad
MG Chemicals 9200-25ML #ad - The 9200 structural epoxy adhesive is a two-part, thixotropic, toughened adhesive that is designed to create load bearing joints. It is especially suitable for sheet molding compound SMC and glass-reinforced plastics GRP bonding. A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams.

Gennel g109. 40 to 150 celsius temperature range. The toughened adhesive protects against vibration damage when fully cured, but remains sufficiently flexible to accommodate thermal cycling stresses when bonding materials with different coefficients of thermal expansion. Perfect for led GPU Chipset Heatsink.

MG Chemicals 9200 Structural Epoxy Adhesive, 25mL Dual Dispenser #ad - 10gram Tube. It provides superior environmental protection and performs very well under temperature cycling. Gap Filler. It is thixotropic, which makes it a great gap filler and is sag resistant—perfect for use on vertical surfaces. 5g set 2. 5g x 2. Working life: 30 minutes, cure time: 24 hours. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride.

Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti.

#ad



MG Chemicals Static Mixing Tip for 50 mL Dual Epoxy Cartridge Pack of 5

#ad
MG Chemicals 8MT-50 #ad - Allow precise application directly where you need it. It is designed to dispense an even and accurate amount of compound eliminating spoilage. Simply remove the cartridge nut and plug, attach the static mixer to the tip, and re-screw on the nut to hold the mixer in place. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride.

Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti. The mixer works using stationary elements inside a narrow cylindrical tube. The 8mt-50 mixing tip unit features a standard flow tip while the 8MT-50FT has a fine tip for greater precision dispensing. This forces the materials to combine as it travels through the length of the mixer and provides a homogenous mix of hardener and resin that can be applied directly onto the targeted area.

MG Chemicals Static Mixing Tip for 50 mL Dual Epoxy Cartridge Pack of 5 #ad - Working life: 30 minutes, cure time: 24 hours. 40 to 150 celsius temperature range. The 8mt mixing tips are single use static mixer for 2-part low to medium viscosity cartridge systems. Pure electrical insulator, neither electrically conductive nor capacitive. 1: 1 mix ratio. A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams.

Gennel g109.

#ad



MG Chemicals 8329TCM Thermal Conductive Adhesive, Medium Cure, 14 g, 2 Dispeners

#ad
MG Chemicals 8329TCM-6ML #ad - It has a convenient 1-to-1 ratio, a workable 45 minutes pot life, and a moderate curing rate. Stores and ships at slightly below room temperature - no freezing or dry ice required. Allow precise application directly where you need it. Pure electrical insulator, neither electrically conductive nor capacitive.

10gram Tube. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti. 5g set 2. 5g x 2. Used for thermal management situations requiring superior bonding strengths and good thermal transfers.

MG Chemicals 8329TCM Thermal Conductive Adhesive, Medium Cure, 14 g, 2 Dispeners #ad - Very long shelf life of at least two years - even when stored at room temperature. 40 to 150 celsius temperature range. Provides homogeneous mixture of low to medium viscosity 2-part systems. Layered composite of aluminum oxide and boron nitride. Perfect for led GPU Chipset Heatsink. Gennel g109. Toughened, smooth, thixotropic paste.

#ad



5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~700°C

#ad
SZZJ INC #ad - Layered composite of aluminum oxide and boron nitride. Cable length: 3 meter. Adheres to most electronic substrates. Features: allows forming and bending of the thermocouple, no need to worry about the risk of cracking Can compatible with TM902C/TES1310 Meter to use Operating Temperature: -50-700°C Probe Material: metal Probe Diameter: 0

6mm /0023 inch probe Length: 8. 33mm /0328 inch cable length: 3 meter cable internal insulation: fiberglass Connector: K Type Mini-Connector Package includes: 5pcs 3 meter K Type Thermocouple cable Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride. Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti.

5pcs 3M K Type Mini-Connector Thermocouple Temperature Probe Sensor Measure Range -50~700°C #ad - Gap Filler. Strong water and chemical resistance to brine, acids, bases, and aliphatic hydrocarbons. Gap Filler. A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams. Allows forming and bending of the thermocouple, no need to worry about the risk of cracking. Pure electrical insulator, neither electrically conductive nor capacitive.

#ad



MG Chemicals Super Strength Fast Set Epoxy, 5000 PSI, 25 ml Dual Dispenser, Non Conductive

#ad
MG Chemicals 8332-25ML #ad - 5g set 2. 5g x 2. To stop the flow, pull back on the plunger. Excellent 1. 3. 1: 1 mix ratio. 8332 is a quick-set, two-part epoxy adhesive with a five-minute working life. Provides strong electrical insulation. After use, dispose of static mixer. Very long shelf life of at least two years - even when stored at room temperature.

5. Bonded parts only need to be held together for eight to ten minutes before they sufficient set for handling. Cure instructions: Room temperature cure: Let cure at room temperature for 5 h. Clean nozzle to prevent contamination and material buildup. Dispense a small amount to ensure even flow of both parts.

MG Chemicals Super Strength Fast Set Epoxy, 5000 PSI, 25 ml Dual Dispenser, Non Conductive #ad - Can compatible with tm902C/TES1310 Meter to use. Easy 1: 1 mix ratio. Pure electrical insulator, neither electrically conductive nor capacitive. 4. This is a general purpose adhesive suitable for household, industrial and manufacturing applications. A set of arctic alumina Thermal Adhesive consists of two tubes containing a total of 5 grams.

Allows forming and bending of the thermocouple, no need to worry about the risk of cracking.

#ad



Uxcell a14111400ux0256 uxcell Aluminum Heat Radiator Heatsink Cooling Fan 150x69x37mm Silver Tone

#ad
uxcell a14111400ux0256 #ad - Very long shelf life of at least two years - even when stored at room temperature. Stores and ships at slightly below room temperature - no freezing or dry ice required. Allows forming and bending of the thermocouple, no need to worry about the risk of cracking. Arctic alumina adhesive uses a layered composite of aluminum oxide and boron nitride.

Arctic alumina adhesive is a pure electrical insulator, neither electrically conductive nor capaciti. Layered composite of aluminum oxide and boron nitride. 1: 1 mix ratio. Pure electrical insulator, neither electrically conductive nor capacitive. Provides strong electrical insulation. Tensile strength of 5000 psi.

Uxcell a14111400ux0256 uxcell Aluminum Heat Radiator Heatsink Cooling Fan 150x69x37mm Silver Tone #ad - Bonds dissimilar materials. Allow precise application directly where you need it. Weight : 410g. For use with: 832hd-50ml, 8329tff-50ml, 8329tfm-50ml and 8329tfS-50ML Dual Epoxy Cartridges. Please check the specification table and make sure that the size of the heatsink fits that of your component. Provides homogeneous mixture of low to medium viscosity 2-part systems.

40 to 150 celsius temperature range.

#ad



Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F

#ad
Chip Quik SMDLTLFP-CHIP QUIK #ad - Solder paste Sn42/Bi57. 6/ag04 no-clean lead-free low temperature Melts 138C 281F eutectic. Gennel g109. 5g set 2. 5g x 2. Color : Silver Tone. Tensile strength of 5000 psi. Layered composite of aluminum oxide and boron nitride. Lead free / RoHS. Cable length: 3 meter. No Clean. Allow precise application directly where you need it.

Allows forming and bending of the thermocouple, no need to worry about the risk of cracking. Package content : 1 x Heatsink. Provides homogeneous mixture of low to medium viscosity 2-part systems. 40 to 150 celsius temperature range. Low Temprature. Gap Filler. Very long shelf life of at least two years - even when stored at room temperature.

Solder Paste Sn42/Bi57.6/Ag0.4 No-Clean Lead-Free Low Temperature Melts 138C 281F #ad - Product name : Heatsink; Material : Aluminum. 10gram Tube. Pure electrical insulator, neither electrically conductive nor capacitive. Easy 1: 1 mix ratio. For use with: 832hd-50ml, 8329tff-50ml, 8329tfm-50ml and 8329tfS-50ML Dual Epoxy Cartridges.

#ad